How To Reset Maintenance Light On Toyota Tacoma 2015. Press the “ power ” button once without holding the brake to activate the electronics. Once you’ve selected that gear, scroll down to settings and press enter.
Then select the “maintenance reset” option and press the toyota. Demonstration is on a tacoma, but works for tundra, camry and other toyota vehicles as w. How do you reset the maintenance light on a 2013 toyota tacoma?
Follow These Few Simple Steps To Reset Maintenance Light Toyota That Is Not A Camry Or Prius:
Start the car and then press and hold the button that changes the odometer reading. Use the up and down arrows to select “ settings “, then press. Notice at the power steering there are a few arrow buttons.
How To Turn Off Maintenance Light On Toyota Tacoma.
Select “gear” with the left and right arrow buttons using the info display. If it does not, press down the ‘reset’ or ‘trip’ button until the reading on the odometer displays ‘trip a’. Here's an example of how to reset the maint reqd light on a toyota.
To Reset The 2015 Toyota Corolla S Maintenance Light Put The Key In The On Position, Turn The Key Off, Press And Hold The Odo/Reset Button And Turn The Key Back To The On Position Without Starting The Engine.
After the oil change, you can reset the light as follows: Go to the odometer and press the odometer to the “trip a” position, then turn the key “off”. Press the “ power ” button once without holding the brake to activate the electronics.
How To Reset Maintenance Light On Toyota Tacoma 2015.
Use the arrows to select “ maintenance reset “, then press. Press and hold the trip meter reset nob, and hold until the maintenance required light goes off. Once you’ve selected that gear, scroll down to settings and press enter.
Press And Hold Odo/Trip Button And Turn Ignition To The “Run” Position.
First, insert the key and put the ignition on. Then turn the ignition to off. Your engine should still be off.